- $ lsb_release -a
- M-NotePC3: Debian Gnu/Linux 9.11 (stretch)
- Debian-NewKiyoshi: Debian GNU/Linux 9.9(stretch)
- Test from M-NotePc3 debian
「dual boot」カテゴリーアーカイブ
Re-install the GRUB 2 in M-NotePC3
- in debian (which was selected through overriding in BIOS)(in last section:BOOT)
- as root; # grub-install /dev/sda
- message says; Installing for x86_64-efi platform. Installation finisahed. No error reported.
- Grub2 perfectly recovered.
- ref: https://securitronlinux.com/uncategorized/reinstalling-grub2-bootloader-in-debian-6-0/
- Still, cannot be booted from usb key.
M-NotePC3 初期化
1.@win10 更新とセキュアリティ→PC初期化 30min
2.Windows インストール: 30min
3. Win10が立ち上がってさらに更新プログラム:several min
4. Desktopに”削除されたアプリ(html)”
5.Windows side; user section; as was.
6. debian:bios で選択すると立ち上がる。内容はOKのようだ。
7. Bootable usb からの起動:依然として不可能;どうやっても結局win10 に入る。.
change boot order on Debian/Win10 dual boot system
- Find the Windows entry number in the boot loader :
- ~$ cat /boot/grub/grub.cfg | grep menuentry
- This shows the menuentry list in the order 0,1,..; if the Windows boot manager is at the third place, entry number is 2.
- Edit /etc/default/grub;
- ~$ sudo nano /etc/default/grub
- Change the GRUB_DEFAULT from 0 to 2, then save the file.
- GRUB DEFAULT=2
- Update the changes into the boot loader. ;
- ~$ sudo update-grub
dual boot on NewKiyoshi
- On Win10: download:
http://cdimage.debian.org/cdimage/unofficial/non-free/firmware/ current/firmware.zip→usb/firmware→展開 - On debian: prepare iwlwifi
dual boot on M-NotePC3
- Shrink windows(C:) to 144.38GB leaving 78.13GB unallocated.
- Prepare Win recovery usb for safety on ADATA-UV150(RedSort)(8.44/28.8GB)(nominal32GB).
- Important!!:Win10高速スタート解除;コントロールパネル➝ハードウェアとサウンド➝電源オプション➝システム設定➝現在利用可能でない設定を変更➝高速スタートアップ:uncheck→変更保存:
- Insert Debian Install USB (ELECOM MF-KCU3A?)
- BIOS設定:1.secure boot :disabled 2. Boot optionPriorities:Top Boot Option #1:[UEFI:ELECOM MF-KCU3A1100,Partition 1]; UEFI setting: all enabled.→Boot: UEFI Boot: Enabled
- Debian installer started successfully.
- wifidriver preparation is advised, but you can neglect this and just go ahead.
- Mirror cannot be used by error. Proceed without mirror.
- Selected all the available softwares.
- Select default display manager: gdm3