- Shrink windows(C:) to 144.38GB leaving 78.13GB unallocated.
- Prepare Win recovery usb for safety on ADATA-UV150(RedSort)(8.44/28.8GB)(nominal32GB).
- Important!!:Win10高速スタート解除；コントロールパネル➝ハードウェアとサウンド➝電源オプション➝システム設定➝現在利用可能でない設定を変更➝高速スタートアップ：uncheck→変更保存：
- Insert Debian Install USB (ELECOM MF-KCU3A?)
- BIOS設定：1.secure boot :disabled 2. Boot optionPriorities:Top Boot Option #1:[UEFI:ELECOM MF-KCU3A1100,Partition 1]; UEFI setting: all enabled.→Boot: UEFI Boot: Enabled
- Debian installer started successfully.
- wifidriver preparation is advised, but you can neglect this and just go ahead.
- Mirror cannot be used by error. Proceed without mirror.
- Selected all the available softwares.
- Select default display manager: gdm3
- onAVRdragon: spare C (This was porgrammed @edco@2019.07
- (mega164P) sig: 0x1E 0x94 0x0A;fuse read: 0xF7, 0x99, 0xFF; means:JTAGEN,SPIEN,Fullswing Xtal 16Kclk+65ms, lockbit read: 0xFF;
- onAVRdragon:2019-07-12-2(programmed @edco@2019-07)
- (mega164P) sig: 0x1E 0x94 0x0A;fuse read : 0xF7, 0x99, 0xFF; means:JTAGEN,SPIEN,Fullswing Xtal 16Kclk+65ms, lockbit read: 0xFF;
- onAVRdragon: SCAD-U4-C 04/30 8(programmed @2010?/04-30)
- (mega164P) sig read: 0x1E 0x94 0x0A;fuse read:0xF7,0xD9,0xFF;meansSPIE, Fullswing Xtal 16Kclk+65ms; lockbit read: 0xFF;
- Note@2010/01/06 says:mega164Pfuse:high byte: default 0x99 (may not work) ,JTAG disabled 0xD9 (This is safer)
- Above check and discussion explains why new SCAD mega164P did not work!!