NDOT firmware SC&AD -C

NDOT
  1. onAVRdragon: spare C (This was porgrammed @edco@2019.07
  2. (mega164P) sig: 0x1E 0x94 0x0A;fuse read: 0xF7, 0x99, 0xFF; means:JTAGEN,SPIEN,Fullswing Xtal 16Kclk+65ms, lockbit read: 0xFF;
  3. onAVRdragon:2019-07-12-2(programmed @edco@2019-07)
  4. (mega164P) sig: 0x1E 0x94 0x0A;fuse read : 0xF7, 0x99, 0xFF; means:JTAGEN,SPIEN,Fullswing Xtal 16Kclk+65ms, lockbit read: 0xFF;
  5. onAVRdragon: SCAD-U4-C 04/30 8(programmed @2010?/04-30)
  6. (mega164P) sig read: 0x1E 0x94 0x0A;fuse read:0xF7,0xD9,0xFF;meansSPIE, Fullswing Xtal 16Kclk+65ms; lockbit read: 0xFF;
  7. Note@2010/01/06 says:mega164Pfuse:high byte: default 0x99 (may not work) ,JTAG disabled 0xD9 (This is safer)
  8. Above check and discussion explains why new SCAD mega164P did not work!!