There are two discs:
1. Buffalo HD-HBU2 ユーティリティCD version 1.20
This will work. When product number is asked, type in the number on the disc 2
It shows message to upgarde, but no web page exist anymore. But anyhow installed acronis will work in somewhat primitive way.
2. Buffalo HD-WIU2/R1 ユーティリティCD version 3.00
This won’t work.
1. Disk size:
debian-noriko: 40GB
EPSON1211847755: 71.8GB
Let’s assign 20GB for Windows XP, 50GB for Debian jessie.
2. System space of EPSON:
Windows: 9.26GB (8.56GB on Disk)
Documents and Settings: 1.37GB (1.38GB9
Program Files: 1.98GB (1.94GB)
disk C: 17.1GB used, 54.6GB free, 71.8GB total
3. One might shrink the windows partition and create new partition for debian beforehand using Gparted-live-disc. Actually I did it successfully but it was rather complicated. I prefer the follwong.
4. On the working XP (actually recovered by Acronis TI), squash the content of disc C. MyDefrag is more effective than windows’ original defrag. You might confirm the final squashed state by windows disc tool defrag.
5. Boot from debian-8.2.0-amd64.netinst.iso. (Proceed with eth0.)
6. At disc partitioning stag:
6.1 Resize (shrink) the C partition to ~20GB, leaving ~55GB free space.
6.2 Select ( click and enter?) that free space, and partition it in automatic mode, of which separate partitions was chosen this time.
7. Desktop environment, gdm, xcf, kde, web browser, print server,.. were selected.
8. At boot loader setting stage, you can set grub setting to leave windows partition intact.
9. After the installation completed, wifi usb chip (elecom WDC-150SU2M) driver is introduced following ’15/09/15 post. HP Envy 4500 is also set following the same post.
1. Set network connection on console of the printer. The printer will be assigned an IP address by rooter. This address together with mac address can be found in the networking report printout of the printer.
2. Visit rooter (191.168.0.1). Set an new fixed IP (192.168.0.101) on the device with the mac address reported above (d0:bf:9c:a3:fc).
（詳細設定→DHCP固定割り当て設定）
3. Visit the printer ( address asigned at 1.) Set the new IP address (192.168.0.101) manually. Close the browser and revist the printer with new address to confirm the new address setting.
4. The printer IP address is currently 192.168.0.101. with mask 255.255.255.0.
root@debian:~# cat /etc/issue Debian GNU/Linux 7 \n \l
However, the above command may not show the current Debian update point releases. Thus you may get more accurate info with the following command:
root@debian:~# cat /etc/debian_version 7.7