2010/08/16
1. BMmonitor.ver1_0.exe: Windows(xp) exe file
2. AtUsbHid.dll: Windows(xp) dll file which should reside in the same
folder with 1.
3. BMver1_0.hex: firmware hex file

1. Put above 1 and 2 files in a directory on some WindowsXP machine.
2. Check if the exe file runs with the usb connection to the DOT device intact.
3. Go to ATmel and get FLIP,
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3886
4. Install Flip; you better follow the instructions on directory etc. as is.
5. While running BMmonito…exe, click the FirmwareUpgrade button on
the upper right corner.
6. In mycomputer.property->hardware->device manager window, you will
notice “LibUSB-Win32 Devices” pop up, which indicates the DOT usb
controller goes into DFU (device firmware upgrade) mode.
7. Run flip; follow instructions so that you load BMver1_0.hex into
the usb controller AT90USB162 of DOT.