Cadlus X install on win10

未分類
  • cadlusx on oldkiyoshi winxp: ver.4.35
  • install new cadlus X on win10.
  • follow the instruction.
  • difference: folde “PCB” etc. must be in user’s document/Nisoul/CADLUS X/
  • Thus copy the necessary folders from the old Cadlus X folders.

wifi firmware on PCI on debian-oldKiyoshi (1)

debian、wifi

from dmesg information:
visit http://wireless.kernel.org/en/usersDrivers/b43#devicefirmware
-> http://linuxwireless.sipsolutions.net/en/users/Drivers/b43/
->
https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx#b43legacy_driver_.28Open-source.29
-> download
 http://downloads.openwrt.org/sources/wl_apsta-3.130.20.0.o 
download and install
b43-fwcutter package
then:
sudo b43-fwcutter -w /lib/firmware wl_apsta-3.130.20.0.o

Firmware installed O.K.
but: b43legacy phy0 error PHY transmission error
wlan0 never worked.

Actually, it is working intermittently; ping 192.168.0. gets response intermittently.

Then from debian formal site (contrib)
https://packages.debian.org/stretch/firmware-b43legacy-installer
Download and xfer to debian; gdebi failed because of no internet connection. But seemingly, it will follows the same action above.
Files can be found: /usr/share/doc/firmware-b43legacy-installer.
Didn’t try further.

SystemRescueCD @2019/

SystemRescueCD

Using verion 4.6.0 (’15/09/27)

  1. Backup Practice
    1. Boot CD-> default boot -> keymap 22 ->startx
    2. connect backup HDD
    3.  %mkdir /mnt/backup       file may already exist. Anyway->
    4.  Better check:  %ls /dev:  sdb seems  to be backup HDD.
    5.  %mount /dev/sdb5 /mnt/backup
    6. Better check: %ls /mnt/backup;  will show file/dir on the backup HDD
    7. %partimage
    8. select sda1: ->F5

WP migration from localhost/kblog to nakym2.tokyoguide-noriko.net

WP related

The following is not the actual process performed, rather organized or cleaned process.

 1. Open new subdomain nakym2.tokyoguide-noriko.net
1.1 login to lolipop:
1.2 make subdomain: nakym2.tokyoguide-noriko.net
1.3 WP簡単インストール：

2. The following process is performed by FFFTP preferably on oldKiyoshi.
Source means 192.168.0.17/kblog/, target means nakym2.tokyoguide-noriko.net/.
2.1 In target: rename: wp-content -> wp-content.nakym2.org, wp-config.php->wp-config.php.nakym2.org
2.2 Copy wp-content,  of source to target /. ( first download to local then upload to target)
2.3 download wp-config.php from source -> rename wp-config.org.php
2.4  download wp-config.nakym2.org ->rename to wp-config.php
2.5  Rewrite wp-config.php: change database prefix to the original source one; upload to target.
2.6  upload murasecret (better) or knsecret to target /
2.7  export database from source and import to target.
2.8  visit murasecret or knsecret at target site and perform necessary procedure.
2.9  Done!